Ruotate il vostro dispositivo! (Potrete godere al meglio della presentazione dei nostri prodotti!)

Tutte le categorie

Macchine per lavorazione dei metalli in vendita

— 63.133
Tutti gli articoli 3.011 nuovi articoli
Ordina per:
  • Haas Super Mini Mill 2
    • Prezzo stabilito

    Haas Super-Mini Mill 2

    Polonia

    15.045 € $ 16.037 £ 13.000

    WIPS-R - Renishaw probing system AUGER - Chip auger HFP-SMM - High Flow Pump PCOOL - Programmable coolant nozzle 16MB - Memory upgrade Vertical Machining Center; 20" x 16" x 14" (508 x 406 x 356 mm), 40 taper, 15 hp (11.2 kW) vector drive, 10,000 rpm, 1200 ipm (30.5 m/min) rapids, high-speed 20-station automatic tool changer, coolant pump, power-failure detection module, 1 GB program memory, 15" color LCD monitor, memory lock keyswitch, USB port, rigid tapping and work light. Three-phase power only.

  • 1 WILLEMIN W408 MAKODEL anno: 2003
    • Prezzo stabilito

    1 WILLEMIN W408 MAKODEL anno: 2003

    Svizzera | Meyrin


    Longitudinal slide, X-axis stroke 250 mm Transversage slides, Y-axis stroke 200 mm Vertical slide, Z axis stroke 300 mm Feedrate linear axis 15 m/min Divider / turntable axis B tray dia. 180 mm Plateau divider, C axis indexing 360° spindle ISO 25 Spindle motor speed 500 à 12'000 min-1 Spindle motor power 1,5 kW – 8 Nm à 1'500 min-1 cooling à eau Watering device cap. 215 L Tool Changer magasin 24 outilsISO 25 Tool to change tool 0,5 sec. Chip-to-chip change env. 4 sec Swarf collection tray cap. 0,1 m3 Device controlled automatic central lubrication Device for treating compressed air Power packs Illumination lamp installed power 9 kVA / 15 A current max 20 A Air pressure 6 bar

  • Mail informativa per "Metallo"

    Iscriviti per ricevere annunci sui nuovi prodotti NO SPAM!

    Evviva! La tua iscrizione è stata registrata con successo.

    Yay! Per confermare l'iscrizione, clicca sul link che abbiamo inviato via E-mail.

  • (1) x 3 blocchi mascella e Riser adatti per VTL di
    173 € $ 185 £ 150

    (1) x 3 Jaw Set and Riser Blocks suitable for VTL's Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilites available on site. Dismantling & Loading will be at the cost of the purchaser

  • infisso
    • Asta: 9 giorni rimasti

    infisso

    115 € $ 123 £ 100

    Fixture Please Note: This lot does not include the pallet. Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

  • (7) x 3 mascella
    • Asta: 9 giorni rimasti

    (7) x 3 mascella

    173 € $ 185 £ 150

    (7) x 3 Jaw Set suitable for VTL's Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilites available on site. Dismantling & Loading will be at the cost of the purchaser

  • Gru a bandiera con Donati 1000kg Hoist
    347 € $ 370 £ 300

    Jib Crane with Donati 1000kg Hoist, 3.2m Length Approx, 3.5m Height Approx with Pendant Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

  • FROST Circle Manuale Cutter Tipo 283
    231 € $ 246 £ 200

    FROST Manual Circle Cutter Type 283, Throat 28", Capacity 16swg. Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

  • (4) Scatole di pinze
    • Asta: 10 giorni rimasti

    (4) Scatole di pinze

    92 € $ 98 £ 80

    (4) Boxes of Collets Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilites available on site. Dismantling & Loading will be at the cost of the purchaser

  • infisso
    • Asta: 10 giorni rimasti

    infisso

    57 € $ 61 £ 50

    Fixture - Size: 800mm x 800mm x 800mm (h) approx Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilites available on site. Dismantling & Loading will be at the cost of the purchaser

  • Scatola di titolari Carbide Tip
    • Asta: 9 giorni rimasti

    Scatola di titolari Carbide Tip

    57 € $ 61 £ 50

    Box of Carbide Tip Holders Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

  • Infissi e 12 "3 Jaw Chuck
    • Asta: 9 giorni rimasti

    Infissi e 12 "3 Jaw Chuck

    115 € $ 123 £ 100

    Fixtures 800mm x 800mm, 630mm x 630mm, 500mm x 500mm and 12" 3 Jaw Chuck Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

  • Porta Giewont verticale fresatrice No3 FYA 32 millimetri
    289 € $ 308 £ 250

    Gate Giewont No3 FYA 32mm Vertical Milling Machine, Table Size 63" x 12", Throat Size 15", Spindle Taper 50INT, Spindle Speeds 20 to 1500rpm, Pendant Control. Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

  • MYFORD Super Seven Centro Tornio
    • Asta: 4 giorni rimasti

    MYFORD Super Seven Centro Tornio

    578 € $ 616 £ 500

    MYFORD SUPER SEVEN Centre Lathe, Swing Over Bed 7", Distance Between Centres 20", Spindle Bore 5/8", Speeds 25 - 2150rpm, With 3 Jaw Chuck, 4 Jaw Chuck, Collet Set, Cabinet Stand. Please Note: All lots are located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

  • BINNS & BERRY Tridant L1000 Gap Bed Centre Tornio
    4.629 € $ 4.934 £ 4.000

    BINNS & BERRY TRIDANT L1000 Gap Bed Centre Lathe, Swing Over Bed 1000mm, Swing In Gap 1500mm, Distance Between Centres 1500mm, Spindle Bore 4 3/8", Double Gap Length of Gap 24", Spindle Speeds 1 to 1200rpm. Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

  • WADKIN 5 Head Squadratrice tipo EKA
    1.446 € $ 1.542 £ 1.250

    WADKIN 5 Head Tenoner Type EKA, Test No 79263, (2) x 5HP Tenoning Heads Top & Bottom, (2) x 2HP Scribing Heads, (1) x 2HP Cut Of Saw, Ex University Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

  • PROWSAW MEGA semi automatica orizzontale sega a nastro tipo BS-1830
    3.471 € $ 3.700 £ 3.000

    PROWSAW MEGA Semi Automatic Horizontal Bandsaw Type BS-1830, Round Bar 460mm at 90 Degree 760mm x 460mm, at 45 Degree 410 x 460mm, 7.5 Hp Motor Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

  • CARBOLITE forni sottovuoto Tipo HVT 15-75-450
    • Asta: 4 giorni rimasti

    CARBOLITE forni sottovuoto Tipo HVT 15-75-450

    Anno di fare: 2006

    694 € $ 740 £ 600

    CARBOLITE Vacuum Furnace Type HVT 15-75-450, 1500 Degrees, Single Phase, (2006). Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

  • AJAX 12 "Double Ended Strumento Grinder
    115 € $ 123 £ 100

    AJAX 12" Double Ended Tool Grinder, Wheel Size 12" x 1 1/2", Mounted on Spensted Dust Extraction System. Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

  • Tipo KEARNEY TRECKER orizzontale fresatrice No. 3CE
    578 € $ 616 £ 500

    KEARNEY TRECKER Horizontal Milling Machine Type No. 3CE with Vertical Head, Table Size 67" x 15", Spindle Taper 50ISO, Spindle Speeds 25 to 1300rpm, 7.5 Hp Motor, Feed Per Minute 1/2" to 25". Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

  • Tipo KEARNEY TRECKER universale fresatrice No. 2CE
    462 € $ 493 £ 400

    KEARNEY TRECKER Universal Milling Machine Type No. 2CE, Table Size 52" x 12", Spindle Taper 40ISO, Spindle Speeds 25 to 1300rpm with Slotting Attachment and Vertical Head, Plus Horizontal Arbor & Supports. Please Note: This Lot is located in Hyde, Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.

  • (1) x 4 regolabile mascella
    • Asta: 9 giorni rimasti

    (1) x 4 regolabile mascella

    462 € $ 493 £ 400

    (1) x 4 Adjustable Jaw Set Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilites available on site. Dismantling & Loading will be at the cost of the purchaser

  • Boring testa CAT 50
    • Asta: 9 giorni rimasti

    Boring testa CAT 50

    173 € $ 185 £ 150

    Boring Head CAT 50 - from 114mm - 160mm Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

  • Scatola di titolari Carbide Tip
    • Asta: 9 giorni rimasti

    Scatola di titolari Carbide Tip

    86 € $ 92 £ 75

    Box of Carbide Tip Holders Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

  • Scatola di titolari Carbide Tip
    • Asta: 9 giorni rimasti

    Scatola di titolari Carbide Tip

    57 € $ 61 £ 50

    Box of Carbide Tip Holders Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

  • (5) mobili Carrelli con utensili Rack
    289 € $ 308 £ 250

    (5) Mobile Trolleys with Tooling Racks 32" x 20" x 28" high (Excluding Contents) Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilites available on site. Dismantling & Loading will be at the cost of the purchaser

  • (2) a mano utensili Banchi con lo strumento Boysetter & 6 "Vice
    115 € $ 123 £ 100

    (2) Hand Tooling Bench (1) 2m x 0.63m x 1.9m, (1) 2m x 0.46m x 1.76m with Tool Boysetter & 6" Vice (excluding Contents) Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilites available on site. Dismantling & Loading will be at the cost of the purchaser

  • Transpallet, 2500kg Capacità
    • Asta: 9 giorni rimasti

    Transpallet, 2500kg Capacità

    Anno di fare: 2011

    34 € $ 37 £ 30

    Pallet Truck, Capacity 2500kg, S/No. D609949 (12/2011) Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

  • Carrello mobile con CAT 50 Tooling
    115 € $ 123 £ 100

    Mobile Trolley with CAT 50 Tooling Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

  • (2) Tomb Stones
    • Asta: 10 giorni rimasti

    (2) Tomb Stones

    115 € $ 123 £ 100

    (2) Tomb Stones, Pallet Size: 500mm x 500mm x 680mm (h) & 400mm x 400mm x 500mm approx Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilites available on site. Dismantling & Loading will be at the cost of the purchaser

  • Gru a bandiera con Demag 2 Ton paranco
    578 € $ 616 £ 500

    Jib Crane with Demag 2 Ton Hoist, 4m Length Approx, 4.9m Height Approx with Pendant, Driven Drive Shaft Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

  • Churchill PBX universale Grinder
    • Asta: 9 giorni rimasti

    Churchill PBX universale Grinder

    578 € $ 616 £ 500

    Churchill PBX Universal Grinder, 10” 4 Jaw Chuck, 3 Point Steady, Dressers, Heidenhein Dro, 1m distance between Centres Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

  • Piastre di fissaggio
    • Asta: 10 giorni rimasti

    Piastre di fissaggio

    115 € $ 123 £ 100

    Fixture Plates - largest size: 900mm Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilites available on site. Dismantling & Loading will be at the cost of the purchaser

  • 5 "morsa
    • Asta: 10 giorni rimasti

    5 "morsa

    115 € $ 123 £ 100

    5" Machine Vice Please Note: This Lot is located in Newcastle upon Tyne. Unfortunately there are no loading facilites available on site. Dismantling & Loading will be at the cost of the purchaser

Mail informativa per "Metallo"

Iscriviti per ricevere annunci sui nuovi prodotti NO SPAM!

Evviva! La tua iscrizione è stata registrata con successo.

Yay! Per confermare l'iscrizione, clicca sul link che abbiamo inviato via E-mail.

Formato delle vendite

  • Compralo subito (59.304)
  • Aste (3.829)