Ruotate il vostro dispositivo! (Potrete godere al meglio della presentazione dei nostri prodotti!)

Tutte le categorie

Macchine per legno usate in vendita

— 575
Tutti gli articoli 4 nuovi articoli
Ordina per:
  • formatrici Weinig Usato 9999 (fresatrici per la lavorazione a tre e quattro lati) per la vendita Italia
    • Prezzo stabilito

    formatrici Weinig Usato 9999 (fresatrici per la lavorazione a tre e quattro lati) per la vendita Italia

    Italia


    8 Shafts With safety cabin

  • Usato WEINIG PROFIMAT 23 E 9999 formatrici (fresatrici per tre e di elaborazione quattro lati) per la vendita Italia
    • Prezzo stabilito

    WEINIG Profimat

    Italia


    MOULDER BRAND WEINIG MOD. PROFIMAT 23 E CONFIGURATION with nr. 6 shafts Inferior kw 4 Right - Left kw 7.5 kw Superior Superior 5.5 kw 4 Inferior with equipment for timber to cut kw 22 total power kw 45 Smooth plan Working width mm. 230 Feeding unit for short pieces new tools included new 10 blades included with reference guides special price all inclusive

  • Moulder WEINIG UNIMAT 23E
    • Prezzo stabilito

    WEINIG Unimat

    Polonia

    Anno di fare: 1996


    Moulder WEINIG UNIMAT 23E - Year 1996 - Made in Germany - Serviced by the company Weinig Technical data: - Machine-head with 6 spindles Ø 40 mm - For wood dry and wet - 3 pinch rolls on the counter - All spindles are adjustable Spindle alignment : - BOTTOM rIGHT + rIGHT + + + TOP BOTTOM 1. The head horizontal lower engine power 4 kW 2. The head vertical right engine power 4kW 3. The head vertical left engine power 4 kW 4. Vertical head right motor power 4 kW 5. The head horizontal upper motor power 11 kW 6. The head horizontal lower engine power 11 kW - Working width 230 mm - Working height 160 mm - Feed speed 5-36 m / min - Feed speed adjustable on the inverter - Feeding motor power of 5.5 kW - 6000 obr.na minute !!! - FOR WET !!! - Roller feeders densely embedded 8 pieces of steel + 2 rubber - Possibility of cut short work pieces - Lubrication - Pneumatic sliding head (second right and top) - Feed on cardan shafts - Feed table 190 cm

  • Mail informativa per "Legno"

    Iscriviti per ricevere annunci sui nuovi prodotti NO SPAM!

    Evviva! La tua iscrizione è stata registrata con successo.

    Yay! Per confermare l'iscrizione, clicca sul link che abbiamo inviato via E-mail.

  • MOLDURERRA 4-testa -
la
    • Prezzo stabilito

    MOLDURERRA 4-testa - la

    5.628 € $ 6.000 £ 4.863

    4-axis with 5 engines, 2 motors to grueseadoras 4 HP, 2 HP for tupis 5.5 and 4 and 1 Hp engine feeding 0.75 HP

  • Greckon Turbo S 1000
    • Prezzo stabilito

    Greckon Turbo S 1000

    Polonia

    Anno di fare: 2001


    The line connecting panels Greckon Turbo S 1000 WEINIG Turbo-S 1000: Drive servo feed milling table Fully automatic machine for the higher performance range The combination of milling machines with multiple buffer for high performance UNIWERSAL łączarka to perform all types of wedge connections The Possibility of using almost all types of adhesives Dosing monitoring and glue (optional) maximum performance up to 150 parts / min performance presses leading to 12 cycles / min service, generating statistics and diagnostics on the touch panel remote service Specifications Turbo-S 1000 Turbo-S 1000 The length of the material at the input of 150 - 1000 mm Width of wood 40-205 (225) mm Thickness of 20 - 80 mm Length of wood on the output of 3000-6100 mm The strength of iron 120 (145) kN Max . Cross section of wood with the finger length of 10/11 mm (softwood) 100 (120) cm Max. Length of wood with the finger length of 10/11 mm (hardwood) 80 (96) cm yield (vertical merging), a cross section of 3

  • Moulder WEINIG UNIMAT 23 EL
    • Prezzo stabilito

    WEINIG Unimat

    Polonia

    Anno di fare: 1998


    Moulder WEINIG UNIMAT 23 EL - The machine in stock - After the technical review - The state machine - IDEAL - Serviced by GERMAN WEINIG SERVICE COMPANY TECHNICAL PARAMETERS: - Working width 230 mm - Working height 200 mm - Feed speed 7-36 m / min - 8-head machine with a diameter of 40 mm spindles fi - For wood wet and dry - Drive 4 rolls in the lower table - All spindles are adjustable scraper system heads: 1) head horizontal lower 7.5 kW 2) head vertical right 11 kW 3) head vertical left 11 kW 4) The head vertical right 11 kW 5) The head vertical left 11 kW 6) The head of the horizontal top 11 kW 7) The head horizontal lower 7.5 kW 8) Universal head Rotates into account 360 11 kW The SET orginalna PLATES REPLACEMENT FOR feeding table - The engine feed 5.5 kW - The engine of 2.2 kW lifting heads - The machine equipped with cutter zaoblania corners adjustable - 8 rolls pulling the upper gear - Electric height adjustable planing - All engines have the brake - The diameter of the suction

  • Linea Dimter incollaggio tipo di legna ProfiPress T 5500 HF
    • Prezzo stabilito

    WEINIG ProfiPress T 5500 HF

    Polonia

    Anno di fare: 2009


    Line Dimter gluing woodType ProfiPress T 5500 HF - Serviced by GERMAN WEINIG SERVICE COMPANY - Year of manufacture 2009 - In stock TECHNICAL PARAMETERS: - The length of the input elements min / max 900-5500 mm - lamella width 40-120 mm - The thickness of the elements 16-60 mm - The width of 250-1350 mm plates - dimension cut the saw transverse 250-1350mm - The average size of 1000mm - Force min / max 54-352 kN - The width of the loading of the press in 1 cycle max.1350 mm - Max. surface loading of the press in 1 cycle of 7:15 m² - Hydraulic pressure max. 260 bar - Type of wood Hard - Wood moisture 8-12% - Adhesive 1-component glue CONFIGURATION LINE - Automatic loading station and bonding integrated Profipress - Integrated camera for character recognition chalk - Press Press T Profi 5500 - Length / width of the parts to be bonded 5500 × 1350 mm - Automatic adjustment of pressure - The hydraulic unit integrated - Control cabinet / control integrated - Heating high frequency Press WCZ -

  • Weinig Unimat 23 SP
    • Prezzo stabilito

    WEINIG Unimat

    Polonia

    Anno di fare: 2005


    Weinig Unimat 23 SP TECHNICAL PARAMETERS: - Workpiece width min / max 20/230 mm - The height of the work piece min / max 10/90 mm - maximum diameter of the tool 350 mm - The diameter of 180 mm min tool - Spindle diameter 50 mm - The maximum distance from the table saw 80 mm - Main engine power 2 x 22 kW - Engine power feed 7.5; kW - rotational speed 5600 RPM spindle - Feed speed 6-36 m / min - Automatic central lubrication - 3 steel rollers in the lower countertop - 4 rubber rollers pulling the top - size rollers feeding rollers ø 140 x 50, 30, 20, 15 x ø 35 mm - Needed pressure of 6 bar / 10 bar - nominal pressure of 8 bar The machine dedicated to system manufacturers of garden or producers floorboard to produce lamella. High-performance machine for multi-layer parquet, three-layer boards, etc. Perfect surface quality of the product tolerance + / _ 0.1mm ball with a kerf of 1.2 mm (DEPENDING ON width) the highest precision for Both the machine and the final product optimal solution fo

  • Moulder WEINIG Profimat 22 N
    • Prezzo stabilito

    WEINIG Profimat

    Polonia

    Anno di fare: 1999


    Moulder WEINIG Profimat 22 N - The machine in stock - Reconditioned - Fully operational - ready to work - German production - known reputable brand WEINIG - The machine is not painted, original paint - USER MANUAL> - SERVICED BY WEINIG - Max work piece width 22cm - Max work piece height 14 cm - 5 spindles: 1) horizontal bottom 22cm, 4 kW 2) vertical right 14cm 3) vertical left 14cm (right and left 7.5 kW) 4) horizontal top 22cm, 4 kW 5) horizontal bottom 22cm, 4 kW - All heads adjustable up / down, right-left - The diameter of the spindle fi 40mm - Gear shafts Extending from the top 4 of this double - Shaft discharge in advance pull the rubber - Shaft discharge from the rubber bottom in the table pulling - Feed on cardan shafts - Infinitely adjustable feed 6-22 m / min - Feed motor 2.2kW - Automatic thickness adjustment planing motor 0.25kW - Electric adjustment thickness planing - machine is equipped with electric brakes - Central lubrication top - The length of the countertop introdu

  • Moulder Weinig Unimat 23
    • Prezzo stabilito

    WEINIG Unimat

    Polonia

    Anno di fare: 1996


    Moulder Weinig Unimat 23 - Year 1996 - Made in Germany - Serviced by the company Weinig Technical data: - Machine-head with 6 spindles Ø 40 mm - For wood dry and wet - 2 pinch rolls on the counter - All spindles are adjustable Spindle alignment : - BOTTOM lEFT rIGHT + + + + + TOP BOTTOM TOP 1. The head horizontal lower engine power of 7.5 kW 2. The head vertical right engine power of 7.5 kW 3. The head vertical left engine power of 7.5 kW 4. The head horizontal upper motor power 11 kW 5. The head horizontal lower engine power of 7.5 kW 6. The head horizontal upper motor power of 7.5 kW It is possible to change the load-head from the top to the bottom The SET orginalna PLATES REPLACEMENT FOR feeding table - Working width 230 mm - Working height 160 mm - Feed speed 5-36 m / min - Feed speed adjustable on the inverter - Feeding motor power 4 kW - Roller feeders densely embedded 8 pieces of steel + 2 rubber - Possibility of cut short work pieces - Automatic central lubrication - Electrical

  • Moulder Weinig Hydromat 23
    • Prezzo stabilito

    WEINIG Hydromat 23

    Polonia

    Anno di fare: 1996


    Moulder Weinig Hydromat 23 - The machine in stock - perfect condition - Like a new machine - He worked 200 hours - Complete documentation - CE Technical parameters: - Planing width 230 mm - Planing height 140 mm - Adjustable feed - Year 1996-6000 RPM spindle rotation - Feed on hydraulic motors - The power of the hydraulic pump 15 kW - feed speed of 6-60 m / min system heads: bots + RIGHT + LEFT + RIGHT TOP + + + bots bots 1) kW spindle dolne11 2) 11 kW spindle right 3) The spindle left 11 kW 4) The right spindle 7,5 kW 5) The upper spindle 11 kW 6) Lower the spindle 7.5 kW 7) lower spindle 11 kW - LOGOPAC system (CAS) - CAS computer with LCD displays on the spindles to display the dimensions of the profiles - The Possibility of programming tools - Possibility to program profiles - horizontal heads feature jointery - Automatic central lubrication - Seven steel upper rollers - The top four rubber rollers - Five rolls in counter - Comb damping jumpsuit dimensions machine: - Length 800 cm

  • Usato WEINIG UNIMAT 23 EL 1999 formatrici (fresatrici per tre e di elaborazione quattro lati) per la vendita Italia
    • Prezzo stabilito

    WEINIG Unimat

    Italia

    Anno di fare: 1999


    6 Shafts Working width mm. 230 With cutter loader FRIULMAC and conveyor belts for piece return

  • Indicazioni WEINIG POWERMAT 1000
    • Prezzo stabilito

    WEINIG Powermat 1000

    Polonia

    Anno di fare: 2008


    Directions WEINIG POWERMAT 1000 - In stock - Serviced by GERMAN WEINIG SERVICE COMPANY TECHNICAL PARAMETERS: - Working width 20 -230 mm - Working height 8 -160 mm - Spindles 50mm - Feed 6-30 m / min adjustable - pneumatically załanczana roller before the 1st bottom tool "high low" - The engine feed 7.5 kW - Automatic adjustment of thickness planing motor 0.75 kW - spindles - 8 pieces Arranged: + + bOTTOM RIGHT LEFT RIGHT + + + TOP bOTTOM + TOP + bOTTOM 1. The spindle horizontal bottom - 11 kW 8000 r / min. 2. The head of law department - 7.5 KW 8000 rev / min system, 3. Head left division - 15 kW, 8000 rev / min system, - CAS electronic digital display axial setting, 4. Right vertical spindle - 7.5 kW, - System CAS DigiSet - Electronic digital display adjustment 5. The head horizontal top - 11 kW, - CAS DigiSet - electronic digital display, - pneumatically adjustable pressure-shoe 6. Lower horizontal - 7.5 kW, - CAS DigiSet digital display additional adjustment and - pneumatically regu

  • Moulder WEINIG Profimat 22 N
    • Prezzo stabilito

    WEINIG Profimat

    Polonia

    Anno di fare: 1993


    Moulder WEINIG Profimat 22 N - The machine in stock - Reconditioned - Technical documentation DTR - Max work piece width 22cm - Max work piece height 12cm 4 SPINDLE 1 horizontal bottom 22cm - 4 kW 2 vertical right, 3 left vertical - 5.5 kW 4 horizontal top 22cm - 4 kW - All heads adjustable up / down, right-left - The diameter of the spindle fi - 40 mm - 4 pulling rollers toothed, upper - Shaft discharge from the top rubber, pulling - Shaft discharge in the lower table rubber wide, stretching - FEED shafts Karde - Infinitely adjustable feed 4-20 m / min - Engine feed 1.5 kW - Total power of 22 kW - AUTOMATIC SETTING THICKNESS planing - Central lubrication top - The length of the countertop introducing 197 cm - The diameter of the exhaust nozzles 1x140mm, 3x 120mm - Closed cabin dimensions: - Length 230 cm - Width 130cm - Height 140 cm - The weight of about 2000kg

  • formatrici Weinig Usato 2001 (fresatrici per la lavorazione a tre e quattro lati) per la vendita in Svezia
    • Prezzo stabilito

    formatrici Weinig Usato 2001 (fresatrici per la lavorazione a tre e quattro lati) per la vendita in Svezia

    Svezia

    Anno di fare: 2001


    Speed ​​up to 45 m / min Working width mm: 230 mm Planing height: 160 7 spindles 1.Horizontal bottom spindle 7.5 kW spindle 2.Vertical right 7.5 kw 3. Vertical spindle left 7,5 kw 4.Horizontal top spindle 7 , 5 kw 5.Horizontal botton spindle 7.5 kw 6.Horizontal top spindle 7.5 kw 7.Horizontal botton spindle 7.5 kw

  • Usato Weinig 2000 Ottimizzazione Vendita Polonia
    • Prezzo stabilito

    Usato Weinig 2000 Ottimizzazione Vendita Polonia

    Polonia

    Anno di fare: 2000


    A double line Optimizes OptiCut 304 from the scanner Full line Optimizes two optymalizerkami OptiCut 304 and the scanner to automatically select defects in the material. 2 pieces of an optimizing GreCon Dimter, Type: Opticut 304, year 2004: The dimensions of machined The length of the input 600-4000 mm Full optimization up to 3000 mm Partial optimization to 3000 mm Enter a width of 40-200 mm Strong. entry 15-80 mm Sections of wood max.200x25 mm, 170x50mm, 80x80mm, 140x60 mm Fixed length of drink min. 180 mm Combining a length of 150 mm saw cut / Ablängtoleranz + / - 0.8 - 1.5 mm The curvature max timber. 10 mm per meter length Types of softwood or hardwood feed speed of 170 m / min infinitely Cut to measure from 0.6 to 1.0 sec complete with conveyor Selling chalk station

  • Moulder Weinig POWERMAT 500
    • Prezzo stabilito

    WEINIG Powermat 500

    Polonia

    Anno di fare: 2009


    Moulder Weinig POWERMAT 500 TECHNICAL PARAMETERS; CONSTRUCTION YEAR 2009 Working width 20-230 mm Working height 8-120mm Table input long. 2000mm Feed motor with 4 kW motor height adjustment 0,55 kW Memory System Left head Electronically adjustable Feed cardan shafts, Continuously adjustable 5-40 m / min pneumatically activated roller before the 1st bottom tool "high low" Auto Adjust thickness planing Knife in the countertop to keep elements (acts like a prismatic top) spindle configuration bots + RIGHT + LEFT + tOP + bots Powers engines: 1) Lower head 7,5 kW - 10000 RPM 2) Right head 7,5 kW - 10000 RPM system Power Lock 3) Left head 7,5 kW - 10000 RPM system Power Lock 4) overhead 7.5 kW - 10000 RPM 5) Lower head 5,5 kW - 10000 RPM 10 000 REVOLUTIONS PER MINUTE !!! Eight upper rollers pinch Central lubrication At the output of receiver 3 sorters - Mm diameter spindles fi.40 - Installed power of 52 kW Tail dimensions 5100 x 2000 mm x 2000

  • formatrici Weinig Usato 1998 (fresatrici per la lavorazione a tre e quattro lati) per la vendita in Svezia
    • Prezzo stabilito

    formatrici Weinig Usato 1998 (fresatrici per la lavorazione a tre e quattro lati) per la vendita in Svezia

    Svezia

    Anno di fare: 1998


    Speed ​​up to 36 m / min Working width mm: 230 mm Planing height: 160 6 spindles 1.Horizontal bottom spindle 7.5 kW spindle 2.Vertical right 7.5 kw 3. Vertical spindle left 7,5 kw 4.Horizontal top spindle 7 , 5 kw 5.Horizontal top spindle 7.5 kw 6.Horizontal botton spindle 7.5 kw

  • Usato WEINIG UNIMAT 23 E 2002 formatrici (fresatrici per tre e di elaborazione quattro lati) per la vendita Italia
    • Prezzo stabilito

    WEINIG UNIMAT 23 E

    Italia

    Anno di fare: 2002


    MODEL FEATURES MOULDER WEINIG UNIMAT 23 E 6 TREES A 8000 RPM COMPOSITION TREES 1st SHAFT LOWER KW 7.5 + 2 ° 3 ° 4 ° 15 KW TOUPI TREES TREE TOP TREE TOP 5th KW 7.5 KW 7.5 6 ° TREE LOWER MOTOR KW 7.5 KW 5.5 TOWING ENGINE LIFTING KW 0:55 NOMINAL PASSAGE 230.120 (PLUS 240 X 160) WEIGHT KG. 3200 DIMENSIONS 4500 X 2000 X H2000 MACHINE CONTROLLED COMPLETE DOCUMENTATION AVAILABILITY '' READY PRICE ---------------------------------- -------------------------------------------------- ------- € REQUEST YIELD EXW CAME SNC POLI SERGIO - Translated with google

  • Indicazioni Weinig Powermat 1000
    • Prezzo stabilito

    WEINIG Powermat 1000

    Polonia

    Anno di fare: 2005


    Directions Weinig Powermat 1000 - The machine in stock - After the technical review - Perfect condition - Worked only 6738.2 h - Serviced by GERMAN WEINIG SERVICE COMPANY TECHNICAL PARAMETERS: - Control touch screen WEINIG system Povera COM function software system PowerCom Plus - Working width 20 230 mm - Planing height 8-160 mm - Spindle Ø 40 mm - Feed Continuously adjustable 6-32 m / min - pneumatically activated roller before the 1st bottom tool "high-low" - Automatically bestimmt the height of cut - The machine operated fully with the desktop - spindles 8 pieces Arranged: + + bOTTOM rIGHT LEFT rIGHT + + + TOP TOP bOTTOM + + UNIVERSAL 1) spindle horizontal bottom - 7.5 kW, 8,000 rev / min 2) Spindle vertical right - 5.5 kW 8000 r / min 3 ) The spindle vertical left - 5.5 kW 12000 rev / min system PowerLock 4) The right vertical spindle - 5.5 kW 12000 rev / min system PowerLock 5) spindle horizontal top - 7.5 kW 12000 rev / min system PowerLock 6) spindle horizontal top - 7.5 kW 120

  • Moulder Weinig POWERMAT 500
    • Prezzo stabilito

    WEINIG Powermat 500

    Polonia

    Anno di fare: 2009


    Moulder Weinig POWERMAT 500 TECHNICAL PARAMETERS; CONSTRUCTION YEAR 2009 Working width 20-230 mm Working height 8-120mm Table input long. 4000 mm Feed motor with 4 kW motor height adjustment 0,55 kW The CAS + Memory System Feed cardan shafts, Continuously adjustable 5-40 m / min pneumatically activated roller before the 1st bottom tool "high low" Auto Adjust thickness planing Knife in the countertop to keep elements (acts like a prismatic top) spindle configuration bots + RIGHT + LEFT tOP + + + tOP bots Powers engines: 1) Lower head 11 kW - 8000 RPM 2) Right head 5,5 kW - 8000 RPM 3) left head 5,5 kW - 8000 RPM 4) The upper head 11 kW - 8000 RPM 5) overhead 7.5 kW - 8000 RPM Power Lock system 6) Lower head 7.5 kW - 8000 RPM Power Lock system Seven top rollers pulling Two bottom rollers Tension Central lubrication At the output of receiver 3 sorters - mm diameter spindles fi.40 - Installed power of 52 kW Tail dimensions 5100 x 2000 mm x 2000

  • 4PI601615 SCORNICIATRICE AUTOMATICA
    • Prezzo stabilito

    4PI601615 SCORNICIATRICE AUTOMATICA

    Italia | Castelvecchio Subequo


    SCORNICIATRICE AUTOMATICA A 7 ALBERI WEINIG MOD. UNIMAT 23 E USATA composizione: - 1° orizzontale inferiore kw 5,5 - 2° verticale dx + 3° verticale sx unico motore 7,5 kw - 4° verticale dx 5,5 kw - 5° orizzontale superiore 7,5 kw - 6° orizzontale inferiore 5,5 kw - 7° universale 4 kw - CE (anno 2002)

  • 4PI601601 SCORNICIATRICE AUTOMATICA
    • Prezzo stabilito

    4PI601601 SCORNICIATRICE AUTOMATICA

    Italia | Castelvecchio Subequo


    SCORNICIATRICE AUTOMATICA A 6 ALBERI WEINIG MOD. HYDROMAT H23C - USATA -1°orizzontale inferiore 7.5 kw – 6000 r/min -2°verticale dx 11kW 6000 r/min -3°verticale sx 11kW 6000 r/min -4°orizzontale superiore 11kW 6000 r/min -5°orizzontale superiore 11kW 6000 r/min -6°orizzontale inferiore 5.5 kw 6000 r/min -lubrificazione centralizzata -ricondizionata (anno 1999) -larghezza di lavoro 20-230 mm. -traino a cardano -CE anno 1999 COMPLETAMENTE REVISIONATA A NUOVO

  • 4PI601612 SCORNICIATRICE AUTOMATICA
    • Prezzo stabilito

    4PI601612 SCORNICIATRICE AUTOMATICA

    Italia | Castelvecchio Subequo


    SCORNICIATRICE AUTOMATICA A 7 ALBERI WEINIG MOD. UNIMAT 22N USATA - traino a cardano - piano rigato - riduzione interasse rulli avanzamento composizione: -1° orizzontale inferiore 5,5 hp -2° verticale dx 5,5 hp -3° verticale sx 7,5 hp -4° verticale dx 5,5 hp -5° orizzontale superiore 7,5 hp -6° orizzontale inferiore 7,5 hp -7° universale 7,5 hp

  • 4PI601617 SCORNICIATRICE AUTOMATICA
    • Prezzo stabilito

    4PI601617 SCORNICIATRICE AUTOMATICA

    Italia | Castelvecchio Subequo


    SCORNICIATRICE AUTOMATICA A 6 ALBERI WEINIG MOD. PROFIMAT P26 FORTEC - USATA -orizzontale inferiore -verticale dx -verticale sx -orizzontale superiore -orizzontale inferiore -universale -dispositivo ATS su albero sx -matr. 99792 -CE anno 2003

  • 4PI601603 SCORNICIATRICE AUTOMATICA
    • Prezzo stabilito

    4PI601603 SCORNICIATRICE AUTOMATICA

    Italia | Castelvecchio Subequo


    SCORNICIATRICE AUTOMATICA A 6 ALBERI WEINIG MOD. UNIMAT 23E - USATA -Passaggio mm 230 -Altezza mm 120 -1° orizzontale inferiore -2° verticale dx -3° verticale sx -4° orizzontale superiore -5° orizzontale superiore -6° orizzontale inferiore -Regolazione motorizzata altezza di lavoro -Lunghezza tavolo d'ingresso 2000 -Rulli avanzamento motorizzato -Velocità avanzamento max m/min 36 -Azionamento alimentazione a rulli cardanico -Velocità max. mandrino g/min 6000 -Diametro mandrino mm 40 -Motore principale Kw 11 -Pompa di lubrificazione manuale -Pressore superiore automatico -Cilindro alimentazione temporizzato -Avanzamento regolabile -Avanzamento KW 4 -Potenza totale kW 45 -Matr. 92485 -CE (Anno 2000)

  • 4PI601607 SCORNICIATRICE AUTOMATICA
    • Prezzo stabilito

    4PI601607 SCORNICIATRICE AUTOMATICA

    Italia | Castelvecchio Subequo


    SCORNICIATRICE AUTOMATICA A 7 ALBERI WEINIG MOD. UNIMAT 23 EL - USATA -1° orizzontale inferiore 7,5 KW -2° verticale dx 7,5 KW -3° verticale sx 7,5 KW -4° orizzontale superiore 11 kw -5° orizzontale inferiore 7,5 kw -6° orizzontale superiore 7,5 kw -7° orizzintale inferiore 7,5 kw -Albero2-3-4-5-6 8000 giri/min -Gruppo tandem su verticale dx con gruppi di avanzamento -Piano rigato -Gruppo verticale sinistro mobile -Dispositivo per pezzi corti - Norme CE (anno 1999)

  • 4PI601604 SCORNICIATRICE AUTOMATICA
    • Prezzo stabilito

    4PI601604 SCORNICIATRICE AUTOMATICA

    Italia | Castelvecchio Subequo


    SCORNICIATRICE AUTOMATICA A 6 ALBERI WEINIG MOOD. UNIMAT 23E - USATA -Passaggio mm. 260 -Altezza mm. 120 -1° orizzontale inferiore -2° verticale dx -3° verticale sx -4° orizzontale superiore -5° orizzontale superiore -6° orizzontale inferiore -Albero portalama -Regolazione motorizzata altezza di levigatura -lunghezza di tavolo d'ingresso 1000 -Rulli avanzamento motorizzato -Velocità avanzamento max m/min 24 -Azionamento alimentazione a rulli cardanico -Rulli di traino ravvicinati -Dispositivo antiritorno pezzi -Velocità max. mandrino g/min 6000 -Diametro mandrino mm 40 -Pompa di lubrificazione manuale -Pressore superiore automatico -Cilindro alimentazione temporizzato -Avanzamento regolabile -Matr. 84742 -Norme CE (Anno 1999)

  • 4TC051503 TRONCATRICE
    • Prezzo stabilito

    4TC051503 TRONCATRICE

    Italia | Castelvecchio Subequo


    TRONCATRICE OTTIMIZZATRICE DIMTER MOD. OPTICUT S50 - USATA Lunghezze in entrata max. 4500 mm Larghezze legno min./max. ca. 20 - 300 mm Spessori legno min./max. ca. 10 - 100 mm Sezioni legno min. ca. 20 mm x 10 mm diam. della sega 500 mm sezione di taglio max. 300 mm x 100 mm Precisione di posizionamento dello spintore +/- 0,5 mm Velocità d’avanzamento a regolazione continua max. ca. 60 m/min. Totale ca. 7 kW Consumo aria ca. 125 NL/min. Aria compressa min. 6 bar Velocità aspirazione 30 m/sec. Aspirazione diametro 125 mm - a norme CE (anno 2004)

  • Weinig formatrice automatico
    • Prezzo stabilito

    WEINIG U 22 N

    Belgio | Kortrijk

    Anno di fare: 1976


    Capacity: 230 x 130 mm. Waves: 7 Below 4 kW, Right 3 kW, 5.5 kW Left, Right 5,5 kW, top 5,5 kW, bottom 11 kW, universal 5,5 kW Cardan shaft drive Pneumatic pressures Manual bed lubrication Spindle diameter: 40 mm Incl. Knife adjusting device

  • WEINIG Scorniciatrice per pavimenti
    • Prezzo stabilito

    WEINIG POWERMAT 500

    Belgio | Kortrijk

    Anno di fare: 2005


    Working width: 20-230 mm Working height: 10 - 160 mm 5 waves: Bottom: 5.5 kW Right: 5.5 kW Left: 5.5 kW Above: 11 kW bottom: 7,5 kW All motors: braked, 8000 U / min vertical shafts with PowerLock tool holder to 170 mm height horizontal shafts with diameter 40 mm feed motor: 4 kW, variable feed 5-30m / min preliminary straightening table: 2.5m Automatic Waxilitpump Aangetriebene table roller on the outlet Air Operated upper platen toothed front Abrichtwelle Durofer feed rollers, self-cleaning Hardened Grooved Quick roll spacing Machine operation with memory: -Radialverstellung waves 3 and 4 -Vorschub lt workpiece thickness.

  • WEINIG Scorniciatrice
    • Prezzo stabilito

    WEINIG PROFIMAT 23 E

    Belgio | Kortrijk

    Anno di fare: 1998


    Power: 230 x 130 mm. Waves: 5 below 4 kW, right and left 5,5 kW, top 5,5 kW, bottom 4 kW Grooved mobile shaft 2.5 m. Preliminary Indicative table feed 3 kW shaft diameter 40 mm.

  • WEINIG Scorniciatrice
    • Prezzo stabilito

    WEINIG U 22 N

    Belgio | Kortrijk

    Anno di fare: 1978


    Capacity: 230 x 130 mm. Waves: 7 Below 4 kW, 5.5 kW right, left 5,5 kW, Right 11 kW, top 5,5 kW, bottom 4 kW, 5.5 kW universal shaft drive Pneumatic pressures Manual bed lubrication Spindle diameter: 40 mm. Incl. 4 cutter heads

  • WEINIG Scorniciatrice
    • Prezzo stabilito

    WEINIG Unimat

    Belgio | Kortrijk

    Anno di fare: 1992


    Power: 230 x 130 mm. Waves: 9 below 5.5 kW, 5.5 kW right, left 5.5 kW, 7.5 kW right, left 7,5 kW, top 5,5 kW, bottom 5,5 kW, top 7,5 kW , below 7.5 kW shaft diameter: 40 mm. 5 driven table rollers feed: 6 - 36 m / min Grooved mobile shaft for different working widths

  • Weinig formatrice automatico
    • Prezzo stabilito

    WEINIG H 22 B

    Belgio | Kortrijk

    Anno di fare: 1985


    Working width x height: 220 x 120 mm. Waves: 8 below 7.5 kW, 5.5 kW Right, Left 7.5kW, 7.5kW Right, Left 7,5 kW, top 7,5 kW, top 5,5 kW, bottom 5,5 kW free space for lower shaft between the 2 harmonics anvil on all horizontal shafts 1, 6, 7 and 8 straight jointer for the shaft 7 profile jointers for wave 8 spindle speed: 6000 t / min Kardanantrieb Short roll spacing pneumatic pressures Manual bed lubrication spindle diameter: 50 mm. Feed 6-48 m / min, 7.5 kW 3 rolls in table

  • WEINIG Scorniciatrice
    • Prezzo stabilito

    WEINIG U 17 A

    Belgio | Kortrijk

    Anno di fare: 1985


    Editor Mass: 180 x 130 mm. Waves: 6 40 mm shafts below 4 kW, 4 kW right, left 5.5 kW, 5.5 kW right, top 5,5 kW, bottom 7.5 kW feed chains, motor 3 kW pneumatic printer 5 cutter heads with inserts

Mail informativa per "Legno"

Iscriviti per ricevere annunci sui nuovi prodotti NO SPAM!

Evviva! La tua iscrizione è stata registrata con successo.

Yay! Per confermare l'iscrizione, clicca sul link che abbiamo inviato via E-mail.

Formato delle vendite