- Prezzo stabilito
One (1) used Davis-Standard Thermatic extruder, model 25IN25, 2.5" diameter screw, 30:1 L/D, 6 heating zones, 50 HP motor, 17.2:1 gearbox ratio, Davis Standard serial# AG293, with Kreyenborg hydraulic screen changer, with Process Controls Corp. 4-compartment blender/feeder model EB476DF004 with controls.
1.25 Welex Extruder, 24:1 L/D Ratio, 10 HP Baldor DC Motor With Spectrum DC Drive, Air-Cooled Barrel, 3 Barrel Zones, 3 Die Zones, Eurotherm/Barber Coleman Instruments, Gefran Pressure Transducer With Gefran 40TB Pressure Readout, 42 Centerline, Approximate Max Screw Speed 115-120 RPM, Belt Driven, 7.31:1 Koellmann PEZ14 Gearbox Rated To 16 HP, On Casters, Model Number 1.25.24:1, S/N 2515.10.84, 460/3/60, 65 Amps. | Includes 4 Hole Strand Die And Hopper | Approximate Dimensions & Weight: | 64 L x 38 W x 84 H | 2,000 LBS
100MM DAVIS-STANDARD EXTRUDER, 26: 1 L / D, 60 CV
Stati Uniti | Cleveland
One (1) used 100MM Davis-Standard extruder, model 3.5MV-350, 26:1 L/D, electrically heated, air cooled, 60 hp ac motor, 460 volt with with VFD controller, 17.4:1 gearbox ratio, control panel with 5 barrel, 3 die zones with model 2208 Eurotherm controllers, less screw, so# 71076, serial# 16467, new 2000
Mail informativa per "Macchine per estrusione"
Iscriviti per ricevere annunci sui nuovi prodotti NO SPAM!
Ti preghiamo di cliccare il link nella mail che abbiamo appena inviato, al fine di concludere il processo di iscrizione.
One (1) used Davis-Standard Thermatic extruder, model 20IN20, 2" diameter screw, 30:1 L/D, 25 HP motor, 17.56:1 gearbox ratio, Davis Standard serial# U2546, with Kreyenborg hydraulic screen changer - add $3,500.00, with Process Controls Corp. 4-compartment blender/feeder model EB476DF004, with controls.
ONE (1) Used Killion lab multi-filament extrusion system with One(1) 1" Killion extruder, 24:1 L/D, electrically heated, air cooled, jacketed feed section, 3 HP DC motor with SCR controller, 3 barrel zones, serial no. 11579F, one (1) used gear pump, One (1) used multi-filament dies / spin pack, on base with controls.
LCI 70 \ 70 Pompa Melt con il 20 del motore e azionamento
Stati Uniti | Valley Cottage
Spagna | Elche
Reference: GT-1982 Description: Extruder LMP (Maris), 2 co-rotating spindles with 125mm diameter and 2650mm spindle (21D) and 400mm (3D) spindle. 37kw motor, 220 / 380V, variable speed. Observations: In State request information Please fill out the form if you need more details about this product. Fill in the required fields (*) Name and Surname (*) Company (*) Email (*) Phone (*) Country / City (*) Description of your request (max 500 characters):
Spagna | Elche
Reference: GT-2317 Description: Extruder EUROTECNO brand, type E4535, 1 spindle of 45 Ø, 35L / D, year 1989. Degasser, 1 spare spindle, 60cv motor with variable speed and thread head. Info Please fill out the form if you need more details about this product. Fill in the required fields (*) Name and Surname (*) Company (*) Email (*) Phone (*) Country / City (*) Description of your request (max 500 characters):
1.5 Davis Standard Pedestal Extruder,24:1 L/D Ratio, 15:1 Gearbox Ratio, 100 RPM Screw Speed, 10 HP Gearbox Capacity, 7.5 HP Reliance DC RPM III Motor, Reliance FlexPak 3000 Drive, Air-Cooled Barrel, 4 Barrel Zones, 2 Die Zones. | Temperature Control Panel With NEW Eurotherm 3205 Temperture Controllers, NEW Dynisco Pressure Transducer, NEW Dynisco UPR 900 Pressure Readout, Temperature Solid State Relays, Breakers, Tachometer, Melt Temp, Amp Gauge, 480/3/60, 38 AMPS. | Barrier Flight Screw With Spiral Maddock Mixer. | Model DS-15, SO Number 58124, S/N U5767, New In 1997. | Includes Die Head & Hopper. | Approximate Dimensions And Weight: 84 L x 60 W x 84 H, 2,000 LBS
Spagna | Elche
Reference: GT-2102 Description: Recycling line, Gamma Meccanica brand, with extruder of 105 diameter, 35L / D, type EST-GM-105, with forced feed. 4,500 liters with hydraulic group of 10cv, with changer of hydraulic filters of 140 of diameter. Cut to head to the water, type TF-600 with centrifuge of 15cv, tape of 1.40 X 0.35 with reduction motor of 0.5cv with weighing and Venturi of material shipment with silo of 500 liters. Observations: In State request information Please fill out the form if you need more details about this product. Fill in the required fields (*) Name and Surname (*) Company (*) Email (*) Phone (*) Country / City (*) Description of your request (max 500 characters):
Spagna | Granollers
Anno di fabbricazione: 1995
CINCINNATI tritube extrusion line mod. CMS 75- 30 | Extrusion equipment for manufacturing hose PE two or three separate tubes preferably used in the telecommunication sector. | One of the main features is the special head three separate outputs that can optionally make two or three continuous tubes which, subsequently, can be attached, according to the needs, another team coextrusion line. This system ensures the exact circumference of the tubes without any kind of oval or deformity. | It has exceptional capacity, of the order of 5 5 to 6 - m / min, or equivalent to about 200 kg / hour with diameters 40 to 50 mm. |. Composed by: | - CINCINNATI Extruder mod. CMS 75-30, 1995. | - Co-extruder line for the connection of pipes, PERIPLAST 35, 2001 | - Hot empty WINDSOR 63, 2001 | - WINDSOR cooling bath 63, 2001 | - Drag PERIPLAST, 2001 | - Cutting PERIPLAST, 2001 | Toolings includes bathtubs vacuum and cooling to diam. 40 to 50 mm. | Dimensions and nominal power: | - Length approx .: 32 m |.
65 "lamiera larga HPM, 18" rotoli indipendenti di azionamento, estrusore da 4,5 "
65 Wide HPM Sheet Line Consisting Of The Following Pieces: | 4.5 HPM Extruder, 30:1 L/D Ratio, 250 HP Emerson DC Motor, 146 RPM Max. Screw Speed, Model 4.5 TMIII 30, Control Techniques Quantum II DC Drive, Vented Barrel, Vent Located Approximately 82 From Feed Throat, 7 X 6 Rectangular Feed Throat, 52 Centerline, 5 Barrel Zones, 12 Downstream Zones, Barber Coleman 7EF Temperature Controllers. Water Cooled Barrel -Extruder Needs New Heater Bands, S/N 94021, New In 1994. | 4.5 Slide Plate Screen Changer With Hydraulic Power Pack, Disassembled But All Parts Are Present. | Melt Pump(Not Currently Being Used In Line, Need Control Work) | 66 Wide Sheet Die | 65 Wide X 18 Diameter HPM Sheet Stack, Model Sheetmaster II, Independently Driven Rolls, Cone Drive Gearboxes, 3 HP Powertec Brushless DC Motors, S/N 89182, New In 1989 | 18'' Approx. Length Cooling Conveyor With (3) 6 Dia. X 18 L Heat Exchangers And (3) Water Pumps | 65 Wide X 8 Dia. Rubber Pull Rolls | Wysong Shear, Model HS1460, S/N P
Spagna | Elche
Reference: GT-2258 Description: 3.30 x 0.40 pellet chiller with vibrators and aspirator, cyclone and alveolar valve, JOST brand. Observations: In State request information Please fill out the form if you need more details about this product. Fill in the required fields (*) Name and Surname (*) Company (*) Email (*) Phone (*) Country / City (*) Description of your request (max 500 characters):
Anno di fabbricazione: 1999
(Plant in Poland) USED: Primplast three layer stretch cast film extrusion line 78” (2000 mm) useful width with a working speed of 1787.5’ (550 meters/550000 mm) per minute with a thickness of 8 to 40 microns and a pre-stretch up to 300% consisting of: (1) Doteco gravimetric dosing system for 4 x extruders. (1) Primplast single screw extruder, type PW180-30D. 7” (180 mm) dia. screw. 30:1 L/D. Capacity 2640 lbs/hr. (1200 kgs/hr.). Nitride barrel, electrically heated, air cooled. Driven via a gearbox by a 600HP/400 Kw-460 volt/50cycle/3Ph AC motor. (1) Primplast single screw extruder, type PW120-30D. 4.7” (120 mm) dia. screw. 30:1 L/D. Capacity 1320 lbs/hr. (600 kgs/hr.). Nitride barrel, electrically heated, air cooled. Driven via a gearbox by a 300 HP/200 Kw-460 volt/50cycle /3Ph AC motor. (1) Primplast single screw extruder, type PW90-30D. 3.5” (90 mm) dia. screw. 30:1 L/D. Capacity 660 lbs/hr. (300 kgs/hr). Nitride barrel, electrically heated, air cooled. Driven via a gearbox by a 242
6" cambiafiltro BERINGER IDRAULICO
Stati Uniti | Cleveland
Used Erema COAX 101E Recycling System with Integrated Single Shaft Shredder | Approximate Output: 198 to 242 LBS/HR | 16'' L x 22 Wide Cleated Conveyor, 1 Cleats on 13 Centers, 8 High Walls, Metal Detector | Approx. 25.5 Wide Single Shaft Shredder With Hydraulic Ram, Index-able Cutter Knives | Double De-Gassing Vented Barrel | Single Shaft Shredder and Single Screw Extruder Driven by 54KW(72HP) Common Motor | Siemens Touch Screen | Manual Screen Changer | Hot Face Pelletizer
MAGIC 15 XL
Germania | Windhagen
Polar Process, Model PP352HU3, stainless steel, twin screw extruder. Hopper dimensions: 12½" in Length; 7½" in Width; 9" in Depth. Equipped with a stainless steel product hopper, two 3½" diameter x 26" long stainless steel feeding screws, 1 hp drive and a 3½"OD / 3"ID Tri-clamp style discharge with reciprocating ultra sonic knife cut off. Control panel with push button start/stop and touch pad speed controls. Mounted on a stainless steel base with locking casters.
2.5 Polytruder Extruder, 26:1 L/D Ratio, 17.85:1 Gearbox Ratio, Flender SZNE200 Gearbox Rated To 130 HP, Belt Driven, 40 HP US Motors DC Motor, Control Techniques Quantum III DC Drive, 4 Barrel Zones, 5 Die Zones, Omron E5EK Temperature Controllers, 42 Centerline, 2.5 Round Freed Throat, Leveling Pads, Wired For 460/3/60(Includes 575V Transformer), S/N C004019-01LZ, New In 1998. | Includes Hopper & Clamp | Approximate Dimensions & Weight: 102 L x 56 W x 84 H(With Hopper Removed), 5,000 LBS.
Australia | Adelaide
Anno di fabbricazione: 2003
Anno di fabbricazione: 2010
Anno di fabbricazione: 1990
Anno di fabbricazione: 1987
Anno di fabbricazione: 2001
Anno di fabbricazione: 1994
Line to manufacture PVC tubes: - Twin screw extruder Pasqueti contra-rotating: 80 mm. - Head tube, with row and male - Tube gauges for sizes - Vacuum aluminum tub with 2 vacuum chambers and vacuum pump 4 kw. - Stretching carriage with 5 rollers. - Cutting disc saw: 350 mm diameter and 5 m turner.
TECHNICAL DATA Type extruder for thermoplastics manufacturer Teknomast Model 65 MM RATIO L / D: 30 Cylinder in 5 areas Very good condition Notes • Base profiles and steel sheets welded. Fairing plate cylinder extruder, with conveyors insulated individual for each zone; • material feeding hopper with a capacity proportional to the production rate of the extruder • Motor current 35 kW; Electrical equipment cabinet mounted and wired on the machine
Anno di fabbricazione: 2012
PMH extruder, type EX 30-28 - With 30 mm screw diameter - Screw and barrel are nitrided - Cylinder with shield cooling between funnel and heating zones - 5 cylinder heatable / cooling zones with ceramic heaters and cooling fans - 1 Tool zone is installed in the control cabinet - Hopper - stainless steel - RITTAL cabinet integrated in the machine frame and plug ready installed (CEE plug 5-pin, 32 Ah) - 4 pieces rolls are supplied separately, the Extrudder can be easily moved by mounting the rollers - LENZE inverter for the 4 kW drive motor (AC motor) - Extruder gears, max. Screw speed 125 rpm - Heating output - cylinder 5 x 1200 watt (total 6 kW)
Anno di fabbricazione: 2001
Screw length / mm: 2954 mm Screw diameter: 110 mm RPM: 1500 rpm Heating: 30 kw Auxiliary consumption: 4 kW Power Consumption: 30 kw Motor power: 18.5 - 67 kW Maximum installed power: 123.5 kW Temaperatura Exercise Max: 400 ° C Weight: 10000 Kg Overall dimensions: 6000x3900x2200 mm
Anno di fabbricazione: 1986
Anno di fabbricazione: 2016
Screw:L / D: 60/33: 1 The material of the screw and barrel: 38CrMoAlA Engine power: 45kW Heating power: 6kW × 4Fishing Temperature control of the cylinder: stainless steel heaters, the cooling fan Drive main motor: 45kW inverter Thermostats: RKC contactors Siemens Capacity: max 120 kg / h
Categoria di macchine
L'elenco presente in questa pagina offre una panoramica su prezzi e offerte per estrusori usati.Clicca sull'articolo desiderato per partecipare all'asta.