Ruotate il vostro dispositivo! (Potrete godere al meglio della presentazione dei nostri prodotti!)

Tutte le categorie

Torni usati in vendita

— 3.927
Tutti gli articoli 300 nuovi articoli
Ordina per:
  • ciclo di Tornio
    • Asta: 9 giorni rimasti

    Omap Alpin 250 FMS

    Svizzera | Reiden

    4.500 € $ 4.796 £ 3.888

    Cycle Lathe, 17 piece tool holder (mixed; flat / prism / Drill holder, etc.), manual bezel, 3-jaw chuck diameter spiral ring 200/55029/8 cast including hard drilling and turning jaws, chuck key, chuck 0-13 mm / Mk -4, live center MK 4, center height over bed 250 mm, distance between centers 1000mm, spindle bore 77 mm, "Camlock 8" spindle taper according to DIN 55029, max. 2800 r / min., Tailstock MK-4, weighing about 2000kg originally from Italy

  • MAZAK SQT-15MS CNC centro di tornitura TORNIO
    • Prezzo stabilito

    MAZAK SQT-15MS

    Polonia

    11.880 € $ 12.663 £ 10.265

    Disponibile a breve

  • ciclo di Tornio
    • Asta: 9 giorni rimasti

    Harrison Alpha 460 plus

    Svizzera | Reiden

    Anno di fare: 1999

    4.250 € $ 4.530 £ 3.672

    Cycle Lathe, with "Fanuc" control, height of 230 mm, distance between centers 1500mm, swing over bed 460mm, swing over Cranking 730 mm, swing over Faceplate 270 mm spindle bore 76 mm, recording "Camlock" D1-8 "spindle speed 20-2000 rev / min., bed width 400 mm, power capacity 7,5 / 11 kW, weight about 2720 kg

  • LZ tornio Tiger
    • Asta: 66 giorni rimasti

    LZ tornio Tiger

    1.200 € $ 1.279 £ 1.036

    Maschinenabmaße total 2,300 x 1,000 x 1,500 mm, with top-mounted 4-jaw chuck and additionally it standing 3-jaw chuck, tailstock and tool rest, height above the bed 280 mm, max. Spindle length 1,100 mm, rear port D 70 mm, adjustable spindle speed 18-1000 rpm, adjustable automatic feed, Remarks at feed rates Walter Kranz

  • Mail informativa per "Torni"

    Iscriviti per ricevere annunci sui nuovi prodotti NO SPAM!

    Evviva! La tua iscrizione è stata registrata con successo.

    Yay! Per confermare l'iscrizione, clicca sul link che abbiamo inviato via E-mail.

  • MAZAK rapido turn Nexus 250 Torni CNC
    • Prezzo stabilito

    MAZAK QUICK NEXUS TURN 250

    Polonia

    21.300 € $ 22.704 £ 18.404

    Disponibile a breve

  • ciclo di Tornio
    • Asta: 9 giorni rimasti

    Harrison Alpha 330 plus

    Svizzera | Reiden

    Anno di fare: 1997

    3.000 € $ 3.197 £ 2.592

    Cycle Lathe, with "Fanuc" control, with three-jaw chuck, "Böhni" steel holder with several holders, center height 167 mm, distance between centers 1000mm, turning diameter 330 mm, turning diameter over slide 210 mm spindle bore 42 mm, recording "Camlock" D1-4 "spindle speed 3500 rev / min., weight 1200 kg L x W x H 2040 x 1200 x 1550 mm, manuals available

  • MAZAK QT NEXUS -200-II TORNIO CNC
    • Prezzo stabilito

    MAZAK QT NEXUS -200-II

    Polonia

    28.000 € $ 29.846 £ 24.193

    Disponibile a breve

  • HAAS SL-20T Tornio CNC con HAAS controllo
    • Prezzo stabilito

    HAAS SL-20T

    Polonia

    15.400 € $ 16.415 £ 13.306

    Disponibile a breve

  • tornio
    • NUOVO!
    • Asta: 23 giorni rimasti

    tornio

    Svizzera | Richterswil

    4.000 € $ 4.263 £ 3.456

    Lathe, center width 1000 mm, center height 180 mm, center height without bridge 280mm, passage 38 mm, main shaft MK 5, tailstock MK 3 speeds 16, speed range 45-1800 rpm, infeed (longitude) 0043-0653 mm / t, infeed (cross) 0015-0211 mm / t, thread (metric) 0.4-7 mm / t, thread (inch) 4-70 TPI, thread (diametrically) 8-144 DP, thread (module) 0.25-3.5 mm, travel top slide 95 mm, travel plan slide 180 mm, 3-jaw chuck, diameter 200 mm, 4-jaw chuck diameter 200 mm, clamping disc diameter 300 mm, motor capacity 400 V / 50 Hz / 1500 W / 2400 W dimensionally 750x1920x1500 mm, weight 710 kg

  • Tornio CNC (Vorführmaschine)
    • Asta: 9 giorni rimasti

    King Rich KR-L 300

    Svizzera | Reiden

    10.000 € $ 10.659 £ 8.640

    CNC lathe (Vorführmaschine), with "Siemens 802 D" control, distance 700 mm, turning diameter 300 mm, spindle bore 42 mm, speed 3000 rev / min.

  • HARDINGE SPEED TORNIO
    • Prezzo stabilito

    Hardinge SPEED LATHE


    Specification Description ELECTRICS 110V APPROXIMATE WEIGHT 600 LBS OVERALL DIMENSIONS 2' X 2' X 5'HSOME EXTRA COLLETS VARI SPEED SPEED LATHE FOR POLISHING

  • STANKO TORNIO
    • Prezzo stabilito

    STANKO 16B 16PG


    Specification Description SWING 8" TO CENTER 43" ELECTRICS 600 V 3 PHASE 60 Hz BORE 1 7/8"TAILSTOCK & CROSSLIDE FAGAR NVK 20 DIGITAL READ OUT

  • FEELER TORNIO
    • Prezzo stabilito

    FEELER FTS-27 SERIES II


    Specification Description SWING OVER BED 9" BED LENGTH 36" SPINDLE SPEEDS (VARIABLE) 230 TO 3500 RPM MAIN DRIVE MOTOR (2 SPEED) 2 HP A.C. APPROX. MACHINE WEIGHT 1,000 LBS

  • AMUTIO CAZANEUVE - HB 575
    • Prezzo stabilito

    AMUTIO CAZANEUVE HB 575

    Spagna | Barcelona


    AMUTIO CAZENEUVE universal lathe Model HB 575. Distance between centers 2000 mm Swing over bed 540 mm Centers height 270 mm. Ø over the slide 525 mm. Ø over transversal slide 300 mm. Ø spindle hole 51 mm. Bed width 400 mm. Max cross slide travel 305 mm. 18 Speeds ranges from 20 to 1600 rpm. Motor power 10 CV Equipped with: •Chuck with 3 clamps. •Open steady •Steady Ø 200 mm.

  • DOOSAN - PUMA 300 MC
    • Prezzo stabilito

    Doosan PUMA

    Spagna | Barcelona


    DOOSAN Lathe Lathe CNC with live tool. Model PUMA 300 MC Distance between centers 690 mm. Máx turning length 565 mm. Max turning Ø 355 mm Travels: X 250 (72+178)mm Z 680 mm Axis C 360° (0,001°) Chuck Ø 305 mm Ø inside the front bearing 160 mm Ø Interior clamping bar 103 mm Tailstock quill travel 100 mm Rapid avances X 20 m/mm, Z 24 m/mm, C 200 g/min Max spindle speed 2800 r.p.m. Motor power 22 kW Machine ON: 36072 h. Machine working: 8609 h. Year 2006 Equipped with: •CNC FANUC 21iTB •Turret of 12 positions •Chip conveyor

  • Gurutzpe - SUPER M
    • Prezzo stabilito

    Gurutzpe SUPER M

    Spagna | Barcelona


    GURUTZPE universal lathe Model SUPER M. Distance between centers 3000 mm. Ø over bed 720 mm. Ø over saddle 480 mm. Ø sobre bancada sin escote 960 mm. Recorrido carro transversal 280 mm. Tailstock Ø 72 mm. 18 Speeds from 12 to 1024 r.p.m. Main motor power 10 HP Machine dimensions 5200 x 1500 x 1500 mm. Weight 4500 kgs. Equipped with: •TdeG chuck of 3 clamps Ø 315 mm + 1 set of clamps •Turret quick clamping •4 tool-holder

  • PR - 5000
    • Prezzo stabilito

    Präwema 5000

    Spagna | Barcelona


    PR universal lathe Distance between centers 5000 mm. Ø over bed 1200 mm. Ø over saddle 950 mm. Ø over bed with neckline 1600 mm. neckline lenght 440 mm. Ø main axis 65 mm. Motor power 7,5 CV Weight 7.500 kgs. Equipped with: •Chuck of Ø 1200 mm, 4 independent clamps •Chuck of Ø 1600 mm •3 Closed steadies of Ø 250 , Ø 350 and Ø 600 mm. •2 V-steadies •Turret with 5 tool holders

  • Tornio CNC INDEX GFG250
    • Prezzo stabilito

    INDEX GFG250

    Anno di fare: 1987


    CNC lathe Manufacturer: Index Type: GFG250 Year: 1987 CONSULT TECHNICAL Data Control: Siemens Sinumeric System 8 turning length: 500 mm spindle bore: 65mm Diameter: 250 mm X axis travel: 310mm Z axis travel: 500 mm 16-compartment Revolver Accessories: chip conveyor , all tools (see pictures)!

  • Monforts KNC5
    • Prezzo stabilito

    Monforts KNC5

    Anno di fare: 1996

    14.900 € $ 15.882 £ 12.874

    Turning diameter over slide 500 mm turning length 1000 mm spindle bore 71mm Spindle motor 16,5kW 3-2800 U / min 1681 Nm

  • Daewoo Puma 240LC- 3 "Bar, 10" Chuck, 12 Strumenti, 2005
    • Prezzo stabilito

    Doosan PUMA

    Stati Uniti


    Bar Capacity 3.0" | Chuck Size 10" | Distance Between Centers 25.5" | Max. Swing Over Bed 22.4" | Max. Swing Over Carriage 15.7" | Max. Turning Diameter 16.6" | Max. Turning Length 25.5" | Spindle Bore 3.54" | Spindle Nose A2-8 | Spindle Speed 35-3,500 RPM | Spindle Motor 25 HP | Number of Tools 12 Turret Positions | Tailstock Taper MT#4 | Tailstock Quill Travel/Diameter 3.1"/3.0" | Tailstock Body Travel 23" | X-Axis 9.5" | Z-Axis 26.8" | Rapid Traverse (X/Z) 800/945 IPM | Approx. Machine Dimensions 133" x 66" x 72" | Approx. Machine Weight 11,000 lbs | Fanuc 21iTB Control | 9" LCD Monitor | RS-232 Port Interface for DNC Operation | 10" 3-Jaw Hydraulic Thru Hole Chuck | Tool Eye & Tool Presetter | Standard Coolant System w/ Tank and Pump | Servo Turret | Programmable Tailstock | Slant Bed Design

  • Mazak QT40 - 2.75 "Bar, 12" Chuck, 20,8 "Swing 2006
    • Prezzo stabilito

    Mazak QT40 - 2.75 "Bar, 12" Chuck, 20,8 "Swing 2006

    Stati Uniti


    Bar Capacity 2.75" | Chuck Size 12" | Number of Axis 2 | Max. Swing 20.8" | Max. Swing on Carriage 15.75" | Max. Machining Diameter 12.6" | Max. Turning Length 60" | Spindle Speeds 3,000 RPM | Main Motor 40 HP | X Axis 11.02" | Z Axis 60.51" | Approx. Weight 12,600 lbs. | Mazatrol 640T CNC Control | Tailstock

  • Torretta verticale Tornio - Colonna singola BERTHIEZ BM 180
    • Prezzo stabilito

    Berthiez BM 180

    Anno di fare: 1993


    Features: - Chip conveyor - Band filter - Panel - Tool

  • Mag Boehringer VDF DUS-630TI - 15.75 "Chuck, 120" Centri 2009
    • Prezzo stabilito

    Mag Boehringer VDF DUS-630TI - 15.75 "Chuck, 120" Centri 2009

    Stati Uniti


    Chuck Size 15.75" | Distance Between Centers 120" | Max. Swing Over Bed 24.8" | Stroke of Cross Slide 13.5" | Max. Swing Over Cross Slide 17" Equipped With: Siemens Sinumerik Control | Tailstock | Rota-S Plus 15 "" Chuck Tool Post | Steady Rest | Chip Conveyor | Siemens Sinumerik Control | Tailstock | Rota-S Plus 15 "" Chuck Tool Post | Steady Rest | Chip Conveyor

  • Mori Seiki SL-15- 2 "Bar, 6" Chuck, 6000 RPM, 12 Strumenti 1989
    • Prezzo stabilito

    Mori Seiki SL-15- 2 "Bar, 6" Chuck, 6000 RPM, 12 Strumenti 1989

    Stati Uniti


    Bar Capacity 2" | Chuck Size 6" | Max. Turning Diameter 11.8" | Max. Turning Length 20.7" | Spindle Speed 60-6,000 RPM | Spindle Motor 7.5 HP | Number of Tools 12 Turret Positions | X-Axis 5.3" | Z-Axis 22" Fanuc 10T CNC Control | LNS Bar Feeder | Tool Presetter | Tailstock

  • SMTCL Tornio - 2007
    • Prezzo stabilito

    SMTCL Tornio - 2007

    Stati Uniti


    Max. Diameter Over Bed 49" | Max. Diameter Over Slide 32.25" | O.A Length 195" | Chuck Diameter 32" | Max. Steadyrest Diameter 24" | Turret Stations 8 | Machine Weight 50,000 lbs. | Fanuc OITC Control | Bison All Steel 32" Dia. 3-Jaw Chuck | 3 Roller Steadyrests | Sauter 8 Station Vert. Turret | Ritten MT6 Live Center | Two Renishaw Probes (1 in Process Work Probe, 1 Tool Probe, both run by Machro Programs) | Chip Conveyor | 2 Chip Augers | Full 78" Inside Cabinet Ht. with All 6 Doors Closed, (All 6 Doors Telescope to the left end Flush with the Chuck Face in the Open Position) 60HP - 3 Speed Gearbox with 4,660lbs Torque In Low Gear Max. Part Weight @ 20,000lbs

  • Tsugami BO18 - 10.000 RPM 1998
    • Prezzo stabilito

    Tsugami BO18 - 10.000 RPM 1998

    Stati Uniti


    Max. Turning Diameter 0.71" | Spindle Speed 10,000 RPM | Spindle Motor 5 HP | Sub-Spindle Speed 5,000 RPM | Sub-Spindle Motor 4 HP | Fixed Guide Bushing 6.7" | Rotary Guide Bushing 3.1" | Chuck Model 1.77" | Drive Guide Bushing 3.15" | Z Main Headstock In and Out 6.7" | T1 OD Tool Slide Up and Down 3.94" | X OD Tool Slide Right and Left 1.26” | (7) OD, (3) ID | Fanuc Control | IMECA Mini Boss 325 Barfeeder | 5-Axis |

  • Topper TNL-100A - 2 "Bar, Collet Chuck, 4.500 RPM 2002
    • Prezzo stabilito

    Topper TNL-100A - 2 "Bar, Collet Chuck, 4.500 RPM 2002

    Stati Uniti


    Bar Capacity 2" | Swing Over Saddle 14.60" | Max Turning Diameter 10.40" | Max Turning Length 14.80" | Spindle Speed 4,500 RPM | Spindle Motor 20 HP | Tool Positions 12 Fanuc Oi-T CNC Control | Collet Nose | Parts Catcher with Belt | Chip Conveyor | Tool Presetter | Topper 4' Bar Feeder |

  • Mori Seiki SL-65C - 10.8 'Bar, 24 "Chuck, 12 Strumenti, 1997
    • Prezzo stabilito

    Mori Seiki SL-65C - 10.8 'Bar, 24 "Chuck, 12 Strumenti, 1997

    Stati Uniti


    Chuck Size 24" | Max Diameter Bar Capacity 10.8" | Max Swing Over Bed / Carriage 42.6" | Max Turning Diameter 25.6" | Max Turning Length 27.3" | Main Motor 50/40 HP | Spindle Speed 660 RPM | Turret 12 | Spindle Nose A1-20 | X-Axis Travel 13.8" | Z-Axis Travel 30.3" | Approx. Weight 25,000 lbs. | Approx. Dimensions 12"4" x 8"4" x 8"5" | Fanuc 16T CNC Control | 24" Air Chuck | Chip Conveyor

  • Tornio CNC - Bed inclinato Tipo Okuma LT15M
    • Prezzo stabilito

    Okuma LT15M

    Anno di fare: 1999


    Gebr. CNC slant bed lathe OKUMA LT15M Year 1999 Control: Okuma OSP 7000 L Number of controlled axes: 8 Diameter: 210 mm Swing over bed: 550 mm Swing over carriage: 150 mm turning length: 900 mm Distance between centers: Max. 1174 mm travel x1: 230 mm travel z 1: 460 mm travel x2: 230 mm travel z 2: 900 mm spindle bore: 62 mm Spindle speeds: 45 - 4500 r / min feed: 0.001 to 1000.00 mm / rev Rapid - longitudinal / plan: size 24/20 m / min C-axis: 2 x turrets: 2 x 12 Pos number of driven tools: 2 x 12 Pos diameter of the tool holder in the turret: 40 mm speed of driven tools:.. 100-4500 mm / rev spindle motor: 15 kW weight of the machine ca .: 8,2 t Accessories: 2 St. hydr. 3-jaw chuck 200 mmø, div. Tool holder for Revolver (also for driven tools), chip conveyor, coolant system

  • Spinner TC600-65-MCY
    • Prezzo stabilito

    Spinner TC600-65-MCY

    Anno di fare: 2013


    Rotary spindle V3 to 4000 1 / min / 66 mm, power / torque at S6 / 60%. 24 kW / 228 Nm spindle nose DIN 55026-A8, hole clamping cylinder 66 mm C-axis for spindle including software option "Transmit" to the end face machining and " Cylindrical "for surface machining switching turret 16x for tool holder DIN 69880-30 mm, radially - SPI clutch 16 driven tool stations CNC tailstock for CNC slides in the program moved with MK4 chip conveyor glass scale in the X-axis clamping force control via differential pressure for main spindle, for low clamping forces high-pressure pump 15 bar parts catcher 840D-SL software package "turning with ShopTurn" 840D-SL option: residual material detection and machining for contour pockets and cutting

  • Fryer Easy Turn 24-12,4 "Chuck, 2.200 RPM 1999
    • Prezzo stabilito

    Fryer Easy Turn 24-12,4 "Chuck, 2.200 RPM 1999

    Stati Uniti


    Bar Capacity 3" | Chuck Size 12.4" | Distance Between Centers 71" | X Travel 12.5" | Z Travel 63" | Max. Swing Over Bed 24.0" | Max. Swing Over Cross Slide 16" | Max. Swing Over Gap 30.5" | Spindle Bore 3.15" | Spindle Speed 2,200 RPM | Spindle Motor 10 HP | Rapid Traverse 400 IPM | Machine Dimensions 54.5" x 133.5" x 82" | Machine Weight 8,700 lbs Equipped With: 12.4" 3-Jaw Chuck | Touch 2000 Controller | X&Z Axis are DC Servo Drives | Main Spindle Drive: AC Brushless | Manual Tailstock | Dual Hand Wheels & Jog Handle for Manual Control | 10 Gallon Flood Tank | 12.4" 3-Jaw Chuck | Touch 2000 Controller | X&Z Axis are DC Servo Drives | Main Spindle Drive: AC Brushless | Manual Tailstock | Dual Hand Wheels & Jog Handle for Manual Control | 10 Gallon Flood Tank

  • Ganesh TY5040 - 50 "Chuck, 52" Swing, 10.04 "Bore 2011
    • Prezzo stabilito

    Ganesh TY5040 - 50 "Chuck, 52" Swing, 10.04 "Bore 2011

    Stati Uniti


    Chuck Size (Front) 50" | Chuck Size (Rear) 25" | Rear Chuck Swing 25" | Max. Swing Over Bed 52" | Max. Swing Over Cross Slide 36.20 | Bed Width of Ways 35.40 | Spindle Bore 10.04" | Spindle Nose (Front & Rear) A2-15 | Spindle Speeds 5-550 RPM | Spindle Motor 40 HP | Spindle Bearings Taper Roller Bearings | Spindle Weight Capacity 3,300 lbs | X-Axis 27.5" | Z-Axis 43.25" | Fagor 8055i-TC Control | Dual Chip Conveyors | Full Back Enclosure with Front Sliding Door | 3 Gear Ranges | 4-Way Programmable Tool Post | Conversation Programming | Conventional ISO | G-Code Programming | Teach-In-Playback Capability | 11" LCD Screen Graphics | USB Port | RS-485 Connection | DB-9 RS-232 Interface | MPG Hand wheel

Mail informativa per "Torni"

Iscriviti per ricevere annunci sui nuovi prodotti NO SPAM!

Evviva! La tua iscrizione è stata registrata con successo.

Yay! Per confermare l'iscrizione, clicca sul link che abbiamo inviato via E-mail.

Formato delle vendite