Ruotate il vostro dispositivo! (Potrete godere al meglio della presentazione dei nostri prodotti!)

Tutte le categorie

Trapani in vendita all'asta

— 1.410
Tutti gli articoli 58 nuovi articoli
Ordina per:
  • precisione Trapano
    • Asta: 8 giorni rimasti

    Aciera 23TR 50

    Svizzera | Reiden

    2.600 € $ 2.788 £ 2.239

    Precision drilling machine, working table 410x515 mm, speed 45-4000 U / min., Spindle stroke 120 mm, dimensions 1600x1200x2000 mm, weight 1500 kg Country of origin Switzerland

  • foratura CNC e fresatrice
    • Asta: 8 giorni rimasti

    Fehlmann Picomax 80 CNC-W2/3

    Svizzera | Reiden


    CNC drilling and milling machine, X-axis 700 mm, Y-axis 315 mm, Quill (controlled) Z-axis 172 mm, Quill (manual) Z-axis 180 mm, W-axis 495 mm, speed X and Y axis 1-9'000 min / mm, Z-axis 1-4'000 min / mm, W-axis 1-4'500 min / mm, feed forces: X- and Y-axis 4'800 N, Z axis 10,500 N, clamping surface 1230x410 mm, maximum table load 250 kg distance table to spindle nose (min-max.) 0-165-660 mm, horizontal projection 370 mm, quick tool change system SF 32, speed infinitely 50-9'200 U / min , drilling diameter 30 mm, milling 100 cm3 / min, threading M24, tool changer:. Type of magazine plate, magazine positions 32, dimensions 2400x2500x2750 mm, weight 3400 kg country of origin Switzerland

  • Mail informativa per "Trapani"

    Iscriviti per ricevere annunci sui nuovi prodotti NO SPAM!

    Evviva! La tua iscrizione è stata registrata con successo.

    Yay! Per confermare l'iscrizione, clicca sul link che abbiamo inviato via E-mail.

  • UWM 45b
    • Prezzo stabilito

    UWM 45 B

    Paesi Bassi | Drachten

    Anno di fare: 2012


    Max boorcapacitiet iron 45mm | max. boorcapacitiet steel 40 mm | Max. drilling depth 180 mm | Offset 350 mm | Max. tapcapaciteit M24 | Power rate 0.1 - 0.2 mm // rpm | Max. distance spindle // worktable 770 mm | Max. distance spindle / / grondplaat 1215 mm | Spindle shot MC4 | Spindelsnelheden 18 / / 50-1450 | Work table size 560x560 mm | Size T slots 18mm | dimensions of base 730x500 mm | Kolomdiameter 150 mm | Engine 3 phaze 2 speed 0.85 / / 1.5 KW // 400v | Cooling Pump 40W | Dimensions 1150x700x2280 mm | Weight 460 // 610 Kg | Packaging wooden crate

  • Veloce Trapano radiale Donau
    • Prezzo stabilito

    Veloce Trapano radiale Donau

    Paesi Bassi


    chuck, gradient tubes and cooling system.

  • ERLO - TS 25/32
    • Prezzo stabilito

    ERLO TS 25/32

    Spagna | Barcelona


    ERLO column drill Type TS 25/32 Drill bit Ø 25mm. Table 420x400 mm. Max opening table under the spindle 850 mm. 8 Speeds from 75 to 2100. Weight aprox. 260 Kgs.

  • SIDERIC - -
    • Prezzo stabilito

    SIDERIC -

    Spagna | Barcelona


    SIDERIC Tabletop drill Drill bit Ø 16 mm.

  • Praticare Atlas Copco LBL 350E030
    • Prezzo stabilito

    Atlas Copco LBL 350E030

    Anno di fare: 2001


    Double-spindle drilling machine - Marka: Atlas Copco - Type: LBL 35 E030 - model 2000 and 2001 - Type: LBL 35 E030 r / min = 3000

  • Foratura e fresatura macchina SORALUCE Soramill SP800
    • Prezzo stabilito

    Soraluce Soramill SP800

    Anno di fare: 1998


    Hours: 84,000 hours Table size: 8000mm Table Width: 1100mm Tool fixture: SK50 DIN 69872 Form A drive power: 22KW at 100% speed. 20-3000 continuously feed: 2-5000mm / min rapid traverse: 15000 Length / Width / Height: approx 10260x4455x3300 ride-Bedienerbuehne milling head with 2.5 ° pitch 50 tool stations Maximum tool weight: 20kg Max tool length: 350mm Maximum tool diameter: 115mm, with free Nebenplaetzen 200mm Coolantsystem: 25l / min, 12 bar, 2 pump tank capacity: 500 liters Scharnierbandspaenefoerderer in Bettlaenge, shedding height 1250mm center divider 2 working fields separately available

  • Fresatrice universale MAHO MH 500 W4
    • Prezzo stabilito

    MAHO MH 500 W4

    Anno di fare: 1990


    Universal milling machine with Gegenhaltearm for horizontal milling Manufacturer: Maho Type: Maho 500 W4 Year: 1990 Condition: VERY Good-ready Specifications: Universal milling machine with Gegenhaltearm for horizontal milling Manufacturer: Maho Type: Maho 500 W4 Year: 1990 Condition: VERY GOOD- ready Specifications: gateway control Heidenhain TNC 124: X-500, Y-380, Z-350th Tool holder: ISO 40 (ISO 40) 20-5000 U-min. VERY GOOD CONDITION See images images Similar mint 9 PIECE IN STOCK

  • Worner B 13 S
    • Prezzo stabilito

    Wörner B 13 S

    Paesi Bassi | Drachten


    In good condition verkeende used table drill Worner | Type: B 13 s | Recording: MC 2 | Height adjustment 160 mm | Spindle stroke: 120 mm | Variable speed from 470 to 4200 rpm // min

  • Fresatrice universale MAHO MH 500 W4
    • Prezzo stabilito

    MAHO MH 500 W4

    Anno di fare: 1990


    Universal milling machine with Gegenhaltearm for horizontal milling Manufacturer: Maho Type: Maho 500 W4 Year: 1990 Condition: VERY Good-ready Specifications: Universal milling machine with Gegenhaltearm for horizontal milling Manufacturer: Maho Type: Maho 500 W4 Year: 1990 Condition: VERY GOOD- ready Specifications: gateway control Heidenhain TNC 124: X-500, Y-380, Z-350th Tool holder: ISO 40 (ISO 40) 20-5000 U-min. VERY GOOD CONDITION See images images Similar mint 9 PIECE IN STOCK

  • Suhner monomaster BEM 12-10
    • Prezzo stabilito

    Suhner Monomaster BEM 12-10

    Svizzera | Eriswil

    Anno di fare: 1999

    590 € $ 632 £ 508

    Drill feed unit Suhner Monomaster BEM 12-10 used machine Special design drilling and milling cutters with aggregate Suhner mono master BEM 12-10 570023/99 incorporated into movable steel construction with workpiece clamping Masch. No. 903018 1999 Built in 1999 Weight approx. 200 kg L x W x H: 150 x 60 x 130 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

  • KOHLER CARROTEUSE
    • Prezzo stabilito

    Köhler CARROTEUSE

    Francia | Saint-Quentin

    1.100 € $ 1.179 £ 947

    Disponibile a breve

  • Worner B 13 s
    • Prezzo stabilito

    Wörner B 13 s

    Paesi Bassi | Drachten


    In good condition verkeende used table drill Worner | Type: B 13 s | Recording: MC 2 | Height adjustment 160 mm | Spindle stroke: 120 mm | Variable speed from 470 to 4200 rpm // min digital readouts | Incl bench top drill chuck and drill bit

  • Donau DR 32
    • Prezzo stabilito

    Donau DR 32

    Paesi Bassi | Drachten

    Anno di fare: 1980


    In very good condition used rapid radial drilling Danube | Type: DR 32 | Capacity: 32 mm | Table size: 1200 x 500 mm | Displacement arm: 800 mm | Recording: MC 4 | Tap function | Central lubrication

  • Fresatrice universale MAHO MH 500 W4
    • Prezzo stabilito

    MAHO MH 500 W4

    Anno di fare: 1990


    Universal milling machine with Gegenhaltearm for horizontal milling Manufacturer: Maho Type: Maho 500 W4 Year: 1990 Condition: VERY Good-ready Specifications: Universal milling machine with Gegenhaltearm for horizontal milling Manufacturer: Maho Type: Maho 500 W4 Year: 1990 Condition: VERY GOOD- ready Specifications: gateway control Heidenhain TNC 124: X-500, Y-380, Z-350th Tool holder: ISO 40 (ISO 40) 20-5000 U-min. VERY GOOD CONDITION See images images Similar mint 9 PIECE IN STOCK

  • UWM 40 A
    • Prezzo stabilito

    UWM 40 A

    Paesi Bassi | Drachten


    New drilling and milling machine | drilling up to Ø 40 mm with MC 4 shooting | Chuck 0 to 16 mm | MC4 -> MC3 Adapter |. Free Holder | Equipped with cross table | Tap function, left and right turning combination depth adjustment

  • Mazak Integrex E-1550V / 10 II - 2008
    • Prezzo stabilito

    Mazak Integrex

    Stati Uniti


    Max. Turning Diameter 78.74" | Max. Turning Length 54.92" | Spindle Motor 50 HP | Main Spindle 10,000 RPM | Max. Swing 80" | Tool Magazine Capacity 120 ATC | X-Axis Travel 73.82" | Y-Axis Travel 61.02" | Z-Axis Travel 52.95" | B-Axis Travel 150 Degrees | C-Axis Travel 360 Degrees Equipped With: Mazatrol Matrix CNC Control w/ 15" Color LCD Screen | Manual Pulse Generator | Operator Door Interlock with Lock Switch | Hydraulic Pressure Interlock | Mazacc 3D High Speed Software Package | High Smoothing Control Mazatrol Matrix CNC Control w/ 15" Color LCD Screen | Manual Pulse Generator | Operator Door Interlock with Lock Switch | Hydraulic Pressure Interlock | Mazacc 3D High Speed Software Package | High Smoothing Control

  • HEDISA - -
    • Prezzo stabilito

    HEDISA -

    Spagna | Barcelona


    HEDISA Tabletop drill Max. diameter 16 mm. Spindle travel 120 mm. Indexing tilting chuck. Max. height from table to spindle 450 mm. 5 Speeds, speed shift through drive belt.

  • Okuma V80R diretta Strumento VTL - 2011
    • Prezzo stabilito

    Okuma V80R diretta Strumento VTL - 2011

    Stati Uniti


    Max. Swing 39.37" | Max. Turning Length 33.07" | Max. Turning Diameter 31.50" | Max. Chuck Size 35.83" | Max. Workpiece Weight 1,760 lbs. | Spindle Speed 13-1250 RPM | Spindle Nose A2-11 | Spindle Front Bearing Diameter 7.87" | Spindle Bore Diameter 4.33" | Spindle Drive Motor 60 HP | Turret Type V12 Equipped With: Fanuc OSP200L Control | Powered Chuck 25" IND-3 Jaw | CAT 50 Holders & Collets | Milling Function | Touchsetter | Hardened and Ground Box Ways X&Y | Coolant System | Rear Discharge Chip Conveyor | Fanuc OSP200L Control | Powered Chuck 25" IND-3 Jaw | CAT 50 Holders & Collets | Milling Function | Touchsetter | Hardened and Ground Box Ways X&Y | Coolant System | Rear Discharge Chip Conveyor

  • Ibarmia AZ 32 F
    • Prezzo stabilito

    Ibarmia AZ 32 V

    Paesi Bassi | Drachten

    Anno di fare: 1998


    In very good condition used drill of Ibarmia | Type: AZ 32 V | V belt drive | Max drilling diameter: 32 mm | Power Drill | Chuck | Cooling | Blade guard

  • MAS V050
    • Prezzo stabilito

    MAS V050

    Paesi Bassi | Drachten

    Anno di fare: 1998


    Neat condition at radial drilling machine MAS used | Type:. V050 | Capacity: 60 mm | Track length: 1250 mm | Including drill table | speed and power adjustable with pushbuttons

  • Arboga I 30
    • Prezzo stabilito

    AB Arboga I 30

    Paesi Bassi | Drachten

    Anno di fare: 2009


    In very good condition used drill IMA // Arboga | Type: I 30 | capacity: 30 mm | speed adjustable from 105 to 2900 rpm | V.v. chuck | Semi Gear

  • AUTRE 1.230 millimetri Diamètre - 1.280 millimetri De Long
    • Prezzo stabilito

    AUTRE 1230mm diamètre - 1280mm de long

    Francia | Saint-Quentin

    3.100 € $ 3.325 £ 2.670

    Disponibile a breve

  • Trapano Webo Varia V30
    • Prezzo stabilito

    Webo Varia V30

    Anno di fare: 1979


    Used high-Kastenstaenderbohrmaschine Manufacturer Webo Varia type V30 KS built in 1979. TECHNICAL DATA Height of worktable 800 x 500 mm tool spindle ISO 40 (quick-change spindle) Spindle speed range 70-1750 rev / min feed range 0.05, 0.12, 0.2, 0, 26 mm / rev eQUIPMENT and ACCESSORIES digital display for drilling sleeve various tool holders Coolant motor wellhead adjustment cutout device halbselbsttaetige threading attachment electromagnetic feed shutdown manual feed feed breaker

  • Trapano KOLB KBN G60 / 6M-B
    • Prezzo stabilito

    Kolb KBN

    Anno di fare: 1982


    NC coordinate drilling machine type: KBNG 60 / 6M-B Manufacturer: Kolb Year:. 1982 Specifications coordinates Size Table movement X-axis 2000mm wellhead movement Y axis 1500mm drilling spindle Z-axis 500mm Table area 2250 x 1700 mm Max table load 5000kg Spindle distance above table min 100mm max in retracted position 1100mm performance Max. drive power drill motor 24kw St 60 drilling into solid 60mm Bore 160mm threads (in compensating chuck) M60 x3 milling in GG-20 Max. diameter head diameter (2/3 engagement) 160mm Max. depth of 5mm Max. feed 800mm / min spindle speeds number 41 range 31.5 + 3150 U / min feed X-, Y- and Z-axis, available in 1 mm / min increment 1 - 2000 specified mm / min max. Spindle torque 600Nm max. Feed force 30,000 N

  • DELFOS - -
    • Prezzo stabilito

    DELFOS -

    Spagna | Barcelona


    DELFOS Tabletop drill Drill pit diameter 10 mm.

  • IBA - TMA-75
    • Prezzo stabilito

    IBA TMA-75

    Spagna | Barcelona


    IBA Column drill Geared head drill press. Model TMA-75 Mobile table dimensions 1100x800 mm. Approx. travel 200 mm. Max. diameter 75 mm. Equipped with: * multiple head MIKRON 6 Arms. Taper Morse 2. Motor 10 HP.

  • Trapano Knuth KSB 40B
    • Prezzo stabilito

    Knuth KSB

    Anno di fare: 2008


    Box column drill Manufacturer: Knuth Type: KSB 40B Year: 2008 Technical Data ", the box frame construction which is highly resilient, twisting and stiff" table and drill head are "ongoing 9-step feed and speed unit in oil bath" to optimize machining height individually movable high torque on the entire speed range drilling capacity: 40mm feed force Axial (max.): 16,000 kN Throat: 335mm Maschinenkopfhub: 200mm Quill stroke: 250 mm Z axis: (9) 0.056 to 1.8 mm / rev distance spindle nose - table max .: 650 mm table stroke: 315mm T-slot, width: 18mm T-slots: 3 piece Table area: 480x560mm main spindle torque max .: 350Nm spindle taper: MK 0 spindle speed: (12) from 31.5 to 1.400 1 / min spindle taper: MK4 motor rating main drive 3 kW engine power coolant pump: 0,09 kW Dimensions and weight LxWxH: 1,04x0,91x2,53m weight: 1250 kg

  • GANNOMAT DB-19
    • Prezzo stabilito

    GANNOmat DB-19

    Svizzera | Eriswil

    Anno di fare: 1985

    890 € $ 954 £ 766

    Dowel drilling machines Gannomat DB-19 used machine The Gannomat dowel boring machine DB-19 in good condition is ready for use, Boring bars with 19 spindles Division 32 mm Incl. chassis Gauge for page attacks 2 fence 1500 mm to drill intermediate shelves 1 stop guide 2000 mm for Reihenlochbohrrun Drill bit 8 mm 8 PCs left, 8 piece right Drill bit 12 mm 2 PCs left, 2 piece right Drill bit 14 mm 2 PCs left, 2 piece right Series drill 5 mm 10 PCs left 9 St right Drill 15 mm 2 PCs left, 2 right Drill bit 20 mm 1 St right Drills 24 mm 1 St right Drill 35 mm 2 PCs right Weight 800 kg Year 1991 subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

  • Schneeberger 1 BM
    • Prezzo stabilito

    Schneeberger 1 BM

    Svizzera | Eriswil

    Anno di fare: 1984

    890 € $ 954 £ 766

    Knot-hole boring machines Schneeberger 1 BM used machine Knothole boring machine Schneeberger 1 BM 4-spindle, 2 broken spindles Masch. No. 14228 Built in 1984 Weight approx. 700 kg L x W x H: 120 x 95 x 195 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

  • LAC - STI
    • Prezzo stabilito

    LAC STI

    Spagna | Barcelona


    LAC Column drill Model STI Geared head drill press. Drill bit Ø 25 mm. Round table Ø 420 mm.

  • MOTCH VTL MVSL315 Auto Loader - 12 "Chuck, 45 HP 1998
    • Prezzo stabilito

    MOTCH VTL MVSL315 Auto Loader - 12 "Chuck, 45 HP 1998

    Stati Uniti


    Max. Turning Diameter 15.75" | Max. Chuck Diameter 15" | Chuck on Machine 12" SMW Autoblock | Spindle Diameter 8.66" | Z Axis Stroke 11.02" | Spindle Speed 3600 RPM | Spindle Drive (Cont.) 45 HP | X Axis Travel (Work Area) 12.20" | X Axis Travel (Load/Unload Area) 33.46" | Rapid Traverse Load/Unload Area 1575 IPM | X/Z Rapids in Work Area 945 IPM | Turret Positions 8 Fanuc 21i-T Control | Chip Conveyor | Coolant System | Wes-Tech Automated Systems "Tech-Trak" Pallet Transfer System *2 Available

  • Fresatrice universale MAHO MH 500 W4
    • Prezzo stabilito

    MAHO MH 500 W4

    Anno di fare: 1990


    Universal milling machine with Gegenhaltearm for horizontal milling Manufacturer: Maho Type: Maho 500 W4 Year: 1990 Condition: VERY Good-ready Specifications: Universal milling machine with Gegenhaltearm for horizontal milling Manufacturer: Maho Type: Maho 500 W4 Year: 1990 Condition: VERY GOOD- ready Specifications: gateway control Heidenhain TNC 124: X-500, Y-380, Z-350th Tool holder: ISO 40 (ISO 40) 20-5000 U-min. VERY GOOD CONDITION See images images Similar mint 9 PIECE IN STOCK

Mail informativa per "Trapani"

Iscriviti per ricevere annunci sui nuovi prodotti NO SPAM!

Evviva! La tua iscrizione è stata registrata con successo.

Yay! Per confermare l'iscrizione, clicca sul link che abbiamo inviato via E-mail.

Formato delle vendite